Injection screw and barrel ABS injection molding machine screw and barrel bimetallic screw and barrel

Injection Screw Barrel ABS Injection Screw Barrel bimetallic screw barrelSpecification:Screw diameter: Ø 20mm-Ø 220mmMould clamping force: 250T-3200TShot weight: 30G-30000GBase Materials:(1)38CrMoAlA(JIS SACM645)(2)42CrMo(AISI 4140)(3)4Cr5MoSi V1 (JIS SKD-61)Bimetallic alloy materials:1)Fe-based alloy2)Ni-based all

Featured Products

Injection Screw Barrel ABS Injection Screw Barrel bimetallic screw barrel
Specification:
Screw diameter: Ø 20mm-Ø 220mm
Mould clamping force: 250T-3200T
Shot weight: 30G-30000G

Base Materials:
(1)38CrMoAlA(JIS SACM645)
(2)42CrMo(AISI 4140)
(3)4Cr5MoSi V1 (JIS SKD-61)

Bimetallic alloy materials:
1)Fe-based alloy
2)Ni-based alloy/Deloro alloy
3)Co-based alloy
4)NiCo-based alloy
5)Tungsten carbide/Wolfram carbide

Technics:
Heat treatment
High-frequency quenching
Nitriding treatment
Hard-chrome electroplating
Bimetallic alloy welding
Bimetallic alloy centrifugal casting

Technical parameter:
Nitrided layer depth: 0.5-0.8mm
Nitrided hardness: 900-1000HV
Nitrided brittleness: Less than grade 1
Surface roughness: Ra0.4
Linearity of screw: 0.015mm
Hard-chrome plating hardness after nitriding: ≥ 950HV
Chrome-plating layer depth: 0.025-0.085mm
Bimetallic layer depth: 3mm
 

Main Base materials
 
1.38CrMoAlA  (Nitriding Steel)
2.  SKD-61   (Special Tool Steel)
3.  42CrMo (Ultrahigh Strength   Steel)
4. DC53 ( Cold Work   Die Steel)  
5. W6Mo5Cr4V2 ( High-Speed   Tool   Steel )
6. HPT
 
 
 
Main Alloy Materials
1.  Ni-based alloy/Deloro alloy
2.  Tungsten carbide/Wolfram carbide
3.  NiCo-based alloy
4.  Fe-based alloy
5.  Co-based alloy  
 
 
 
 
Processing Technics
1.  Heat treatment
2.  Quenching
3.  Nitriding treatment
4.  Bimetallic alloy welding
5.  Bimetallic alloy centrifugal casting
6.  Hard-chrome electroplating
 
 
 
 
 
Technical parameters
Nitriding layer depth0.5-0.8mm
Nitrided hardnessHRC56-58
Nitrided brittlenessLess than grade 1
Surface roughnessRa 0.4
Linearity of screw0.015mm
Hard-chrome plating hardness≥HRC57
Chrome-plating layer depth0.03-0.09mm
Bimetallic layer depth3 mm
Bimetallic layer hardnessHRC58-62
Above are main technical information, a suitable screw and barrel will be made according to your requirement.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours